Rain Barrels of Savings
by Jennie Saxe
As I spent a recent weekend doing springtime yard work, I noticed that the side yard of my house seems to have washed away over the past few years. After a short investigation, I realized that three downspouts on my home pointed at this exact location. I wondered…could I use green infrastructure to help slow the flow of rainwater?
I decided to install a rain barrel to direct some of the rain water to storage instead of letting it flow as run-off across the ground. Reducing the amount of run-off from my roof will keep the soil from washing away. As an added benefit, the stored rain water will be perfect for watering our flowers and vegetable garden.
Full disclosure: DIY is not my strong suit. Even though it’s fairly simple to build your own rain barrel, I purchased mine. All that was left was to follow the directions for connecting it to a downspout. Here’s the finished product:
The rain barrel was installed in a couple of hours, but I did make some rookie mistakes. If you’re thinking about installing your first rain barrel, here are some helpful hints:
- Location: I knew which downspout to connect to, but I also had to be sure I was able to connect a hose. I also had to consider where excess water would drain once the barrel was filled. Excess water can be directed to overflow, to another rain barrel, or to a rain garden.
- Safety: A 60-gallon rain barrel will weigh 500 pounds when full, so it’s a good idea to make sure that little ones won’t be tempted to play around it. I used a bed of stones to make sure the base of the rain barrel was sturdy in all weather and able to support the weight of the barrel. To protect against mosquitos using your rain water as a breeding ground, be sure to have screening over all openings.
- Level: This was the hardest part. Since you won’t want to move the rain barrel once it’s installed, take all the time you need on this step.
- Have the right tools: If you purchase your rain barrel, follow the instructions. Common tools will include a level, a hacksaw, and a tape measure. Be sure you also have gloves and eye protection – a cut aluminum gutter can be sharp!
Now, if it would just rain! The conditions in my area have just been declared “abnormally dry” (designated “D0” on the U.S. Drought Monitor map). But with my rain barrel installed, I’ll be ready to save the rain when it does arrive.
About the author: Dr. Jennie Saxe joined EPA’s Mid-Atlantic Region in 2003 and works in the Water Protection Division on sustainability programs. She thanks fellow Healthy Waters bloggers Steve Donohue and Ken Hendrickson for their helpful hints on rain barrel installation.
The views expressed here are intended to explain EPA policy. They do not change anyone's rights or obligations. You may share this post. However, please do not change the title or the content, or remove EPA’s identity as the author. If you do make substantive changes, please do not attribute the edited title or content to EPA or the author.
EPA's official web site is www.epa.gov. Some links on this page may redirect users from the EPA website to specific content on a non-EPA, third-party site. In doing so, EPA is directing you only to the specific content referenced at the time of publication, not to any other content that may appear on the same webpage or elsewhere on the third-party site, or be added at a later date.
EPA is providing this link for informational purposes only. EPA cannot attest to the accuracy of non-EPA information provided by any third-party sites or any other linked site. EPA does not endorse any non-government websites, companies, internet applications or any policies or information expressed therein.