Use Wood Wisely

By Steven Donohue, Region 3

I was born and bred in Pennsylvania. My teen years were spent chopping several cords of wood a year to feed a wood stove in an attempt to heat our drafty old house and reduce our heating bill.  
Today, I use about a half cord of wood a year in our fireplace to brighten cold nights and wet, dreary days. Our energy efficient house and careful burning reduce emissions and save time, money, and my back!

Before burning wood (or any other fuel for heating), it just makes sense to seal up any air leaks and add the recommended amount of insulation to keep the heat you generate inside your house.  “An ounce of prevention is worth a pound of cure.” That old saying, by Philadelphia favorite Ben Franklin, applies as much today as when Ben said it in 1735. 

It’s also important to burn your wood efficiently. Anyone who’s ever tried to heat a house with a traditional fireplace knows they suck almost as much heat up the chimney as they provide.  Our 1970s wood stove was better than a fireplace, but still nowhere near as good as the EPA certified unit I have now.  Our fireplace insert is likely fifty percent more efficient, allowing us to burn a third less wood for the same heat.  And, a few years from now, we’ll have even more efficient units: EPA just proposed new rules to reduce the amount of particulate smoke (unburned fuel) down to the weight of about half a penny per hour.

When using our fireplace, I also make sure I burn only seasoned, dry wood.  Wet wood not only gives off less heat, but it makes more smoke and forms creosote that can cause chimney fires. Having planted my share of trees over the years, I know how long they take to grow, so I try to use the wood they provide us wisely.  Once again, a penny saved is a penny earned. To learn how to tell whether your firewood is ready to burn, and get other information on burning wood efficiently, please visit the  BurnWise website.

About the author: Steve Donohue has been an environmental scientist at EPA for over 20 years. Currently, he works in the Office of Environmental Innovation in Philadelphia where he focuses on greening EPA and other government facilities.

Editor's Note: The views expressed here are intended to explain EPA policy. They do not change anyone's rights or obligations. You may share this post. However, please do not change the title or the content, or remove EPA’s identity as the author. If you do make substantive changes, please do not attribute the edited title or content to EPA or the author.

EPA's official web site is Some links on this page may redirect users from the EPA website to specific content on a non-EPA, third-party site. In doing so, EPA is directing you only to the specific content referenced at the time of publication, not to any other content that may appear on the same webpage or elsewhere on the third-party site, or be added at a later date.

EPA is providing this link for informational purposes only. EPA cannot attest to the accuracy of non-EPA information provided by any third-party sites or any other linked site. EPA does not endorse any non-government websites, companies, internet applications or any policies or information expressed therein.