Do 1 Thing ENERGY STAR: Find More Comfort and Savings by Adding Insulation to Your Attic
By: Doug Anderson
This week EPA invites you to “Do 1 Thing ENERGY STAR,” by sealing and insulating your home. This blog post is the fourth in a five part series from ENERGY STAR’s home envelope expert Doug Anderson about the benefits of sealing and insulating your home, and how you can get started this fall.
In yesterday’s blog, I covered how the attic is typically where the largest energy savings opportunity exists and how to seal air leaks in this area. To complete your attic energy-efficiency improvements, you then need to install additional insulation. By increasing your attic insulation levels, you can save energy and greatly improve the overall comfort of your home.
Attic Insulation: Deciding whether to do it yourself or hire a contractor
If your attic is accessible and not too difficult to move around in, and you enjoy tackling bigger home improvement projects, adding attic insulation may be a good do-it-yourself (DIY) project for you. EPA’s Seal and Insulate with ENERGY STAR program provides great DIY resources to guide you through the process. Even if you are not comfortable taking on this project yourself, there are many qualified contractors who can help you get the work done.
Also, consider consulting a contractor if your attic has wet or damp insulation, moldy or rotted rafters or floor joists, little or no ventilation, or pre-1930 knob and tube wiring. These may require repairs before starting.
Check the Level
Whether you are planning to do the project yourself or hire a contractor, start by checking your attic insulation levels or depth. All you need is a tape measure or yardstick. Taking a few pictures of the existing insulation in each direction inside your attic can provide a good record of where you are starting from, so bring a cell phone camera or digital camera with you.
Use the tape measure or yardstick to measure the depth of your existing insulation. Insulation often varies in depth so check in a few places. Knowing your current insulation depth will help you determine whether you should add more and how much more you should to add.
Choosing your insulation
Next, choose the right insulation for the job. Rolls of insulation can cover large areas of the attic and are great for wide open rectangular attics. They are available in fiber glass, mineral wool, plastic fibers, and natural fibers, such as cotton. Loose fill insulation is another common attic insulation made up of loose fibers of cellulose, fiberglass, or mineral wool that can conform to any space, making it ideal for odd shaped or hard to reach locations.
Installing attic insulation
When installing additional insulation, you do not have to use the same type of insulation that currently exists in your attic. You can add loose fill on top of rolls, and vice versa. If you use roll insulation over loose fill, make sure the roll has no paper or foil backing; it needs to be “unfaced.” Rolls installed over existing rolls should be placed side-by-side perpendicularly to the joists to cover the entire space. Think carefully before you choose this option. The many rolls you will need can be large to carry back from the store in a small car, and can be difficult to squeeze through small attic hatch openings.
If you choose to add loose fill, it may be wise to hire a professional, as the application requires the use of a blowing machine. Some home improvement stores offer rentals of this machine for the motivated DIYer. The machines are heavy and usually require an SUV or pickup to get home.
Keep in mind that insulation can create a fire hazard if it comes into direct contact with places that can get hot, like light fixtures, chimneys or flues, so you should take the proper precautions. Use sheet metal or wire mesh to help create a barrier around them. Some home improvement stores now sell insulation covers for insulating around recessed lights.
Do 1 Thing ENERGY STAR this week. Start insulating your attic to get more energy savings and comfort for your home!
Doug Anderson is an ENERGY STAR Project Manager and has been with EPA for 13 years. He works on issues related to the home envelope, including insulation products and energy efficient residential windows.
The views expressed here are intended to explain EPA policy. They do not change anyone's rights or obligations. You may share this post. However, please do not change the title or the content, or remove EPA’s identity as the author. If you do make substantive changes, please do not attribute the edited title or content to EPA or the author.
EPA's official web site is www.epa.gov. Some links on this page may redirect users from the EPA website to specific content on a non-EPA, third-party site. In doing so, EPA is directing you only to the specific content referenced at the time of publication, not to any other content that may appear on the same webpage or elsewhere on the third-party site, or be added at a later date.
EPA is providing this link for informational purposes only. EPA cannot attest to the accuracy of non-EPA information provided by any third-party sites or any other linked site. EPA does not endorse any non-government websites, companies, internet applications or any policies or information expressed therein.