Skip to content

Rain Barrel Workshop Provides Educational Fun

2013 August 26

By Kevin Kubik

Painted Rain Barrel

Painted Rain Barrel

My wife and I attended a rain barrel workshop in Eatontown, NJ.  The workshop was on teaching people about water conservation and reducing storm water runoff in our communities and making rain barrels. The best part of the workshop was that they gave us everything we needed to make our own rain barrel including the barrel, a spigot and all the fittings.

It was a lot of fun hearing about the program and making the rain barrel. Special instructions were given on how to connect two or more rain barrels in a series to make greater use of big rain events, what to water with the collected water (lawn and garden watering) and what to avoid (consumption). Everyone was also shown a couple of ways to avoiding mosquito breeding in the rain barrel.

I was so impressed with the presentation that I asked the instructor, Sara Mellor, if she could come to our next divisional “All Hands” meeting to give us a short presentation. She even gave us our own rain barrel that we will use in our Edison rain garden.

Rain Barrel Class

Rain Barrel Class

The workshop was provided by the Rutgers Cooperative Extension Water Resources Program, Water Conservation Program, which is a collaborative initiative between Rutgers Cooperative Extension Water Resources Program and the New Jersey Department of Environmental Protection via funding from the U.S. Environmental Protection Agency. The link to the rain barrel program is Check it out.

Every year, as part of “Rutgers Day,” a contest is held for the best painted rain barrel. There’s even a video on how to paint a rain barrel:

About the Author: Kevin Kubik is the region’s Deputy Director for the Division of Environmental Science and Assessment out of EPA’s Edison Environmental Center. He has worked as a chemist for the region for more than 31 years in the laboratory and in the quality assurance program.

Editor's Note: The opinions expressed here are those of the author. They do not reflect EPA policy, endorsement, or action, and EPA does not verify the accuracy or science of the contents of the blog.

Please share this post. However, please don't change the title or the content. If you do make changes, don't attribute the edited title or content to EPA or the author.

One Response leave one →
  1. electra27 permalink
    September 4, 2013

    I have been working on a stormwater runoff container that is spongelike, that absorbs the water during a storm and slowly releases it afterward.

Leave a Reply

Note: You can use basic XHTML in your comments. Your email address will never be published.

Subscribe to this comment feed via RSS