Skip to content

Splash into Savings with ENERGY STAR Certified Pool Pumps

2014 July 17


By Steve Ryan

Did you know there are more than 5 million in-ground pools installed across America, and over 50,000 new in-ground pools built annually? If you are (or are soon-to-be) a pool owner, keeping the water clean is probably a key consideration. That’s where the pool pump comes in– it re-circulates water through a filter to maintain water clarity and hygiene. All swimming pools have at least one recirculation pump, but many have multiple pumps.

Why should you care about your pool pump?

If you have a pool, the pool pump uses the most electricity of any single product in your home. They typically cost $450 a year to operate – much more than they need to. Conventional single-speed pool pumps are set to run at the higher speeds required of the pool cleaner and waste energy during filtration operation, which really only needs half the flow rate. 

How can ENERGY STAR help?

An in-ground pool pump that has earned the ENERGY STAR label can run at different speeds and be programmed to match your pool’s needs with appropriate speed. The energy saved is considerable: reducing pump speed by one-half allows the pump to use just one-eighth as much energy. ENERGY STAR pool pumps are independently certified to deliver those energy savings while providing the performance you expect. In some cases the performance may exceed expectations—for instance, variable speed pumps that earn the label are much quieter. 

Pool Pump

Pool Pump

How much money does an ENERGY STAR certified pool pump save annually?

There are two types of pool pumps that can earn the ENERGY STAR label: multi-speed and variable speed. Multi-speed pumps operate at two speeds and allow the pool owner to reduce the speed of the motor during the majority of its operation. Variable-speed pumps are the most efficient because they can be programmed to operate at many different speeds, even below half speed, depending on the pool usage. Both offer considerable energy savings over the more commonly used single-speed pump.

An ENERGY STAR certified “variable speed” pool pump will use 2,800 kWh less electricity per year, on average, equivalent to:

  • $340 in savings
  • 2.2 tons of reduced greenhouse gas emissions

An ENERGY STAR certified “multi-speed” pool pump will use 2,300 kWh less electricity per year, on average, equivalent to:

  • $280 in savings
  • 1.8 tons of reduced greenhouse gas emissions

This is money you can PUMP back into the family budget.

The energy savings are great … but is it worth it?

Even considering the extra money you might pay to buy them, ENERGY STAR certified pool pumps pay for themselves in about a year-and-a-half (less for multi-speed pumps). And that’s not all. Many utilities offer rebates for ENERGY STAR certified pool pumps. For example, Long Island Power Authority offers a $400 rebate. Check with your local utility. 

By the way, you’re not just saving money, you’re helping the environment

If all pool pumps sold in the United States were ENERGY STAR certified, the energy cost savings would grow to about $110 million each year, and 1.5 billion pounds of annual greenhouse gas emissions would be prevented — equivalent to the emission from nearly 140,000 vehicles.                                                         


Contact your local pool maintenance technician or distributor about ENERGY STAR certified pool pumps. For more information, check out our website

About the Author: Steven Ryan joined the sales and marketing team at the Environmental Protection Agency’s ENERGY STAR Labeling Branch in June 1999 and is currently the Program Manager for ENERGY STAR labeled pool pumps, office equipment, roofing, water heaters, and HVAC products. Mr. Ryan holds a Master’s degree in Environmental Science and Resource Policy from George Washington University and a BA in History from the University of Massachusetts at Amherst.


Editor's Note: The opinions expressed here are those of the author. They do not reflect EPA policy, endorsement, or action, and EPA does not verify the accuracy or science of the contents of the blog.

Please share this post. However, please don't change the title or the content. If you do make changes, don't attribute the edited title or content to EPA or the author.

One Response leave one →
  1. permalink
    October 15, 2014

    Saving energy is more popular now a days. I would like to apply this to my swimming pool also. But i don’t know how to choose a pool pump.

Leave a Reply

Note: You can use basic XHTML in your comments. Your email address will never be published.

Subscribe to this comment feed via RSS